New GSM/GPRS/GPS Tracking Device (GTD)

Product Description

Smart GPS GSM GPRS tracking device for fleet tracking and managing system.

New!
Smaller, smarter.
USB update.
ARM9 CPU
RAM: 64M byte
Flash: 128M ~256M byte

5 digital inputs (2 for control switch. 3 for Level detected)
1 analog signals inputs,
1 outputs, OC drive, 200MA PER/PIN
1 RS232 port Or
2 outputs, OC drive, 200MA PER/PIN Or
2 analog signals inputs, DC 0~12v, 10 bits of precision Or 2 digital inputs. (MUX Pin)
1 USB

Main unit dimensions: 118 * 78 * 30mm
Main unit weight: 0.25kg

** Locate and Track
On receipt of GPS signal, the GTD calculates the position, time, velocity etc. Which can be transferred to control center software with a fixed interval. And the data sending interval (by time interval, distance interval or smart mode) is settable.
** Over-speed Alarm
When over limited speed set prior, an over-speed alarm will be shown on the tracking software in time.
** Geo-fence Alarm
The geo-fence alarm will be shown on the tracking software timely when GTD entry or exit defined area.
** Parameters Settable
Parameters like IP, APN, SMS center number etc. Is settable over the air or by special software and firmware.
** Data Save
It is capable of storing data if GSM signal is unavailable and it will resend the saved data when GSM signal is available.
** Get Ignition On of Off
Status of ignition on or off can be sent to control center software by GTD.
** Urgent Alarm
The driver can send help alarm with an urgent button installed snugly when meets hijack or failure.
** Remote control
With mandatory sponsor from door, shock, fuel, oil, breaks, handbrakes, RPM, engine and other frequent events, control center operator can sent out command to control the vehicle remotely. (**damage, optional)
** External and Internal backup battery interface
It can connect external or internal backup battery if needed. (**optional)
** RFID interface
The GTD can be connected with RFID device which is widely used in driver identify. Only the driver holding ID card can scan RFID reader and be granted to turn on the ignition. (**optional)
** Extend interface
Tell us your detailed requirements, we can do customization with extend interface of GTD. (**optional)